Please select your above ground round swimming pool liner size from the choices below. Each pool size displays 3 options. Once you find your pool size you can then select the pool type option that is appropriate for your particular pool.
(Scroll down or click here to jump to available sizes).
Possible pool types are:
- Overlap
- Expandable (overlap with deep section)
- Beaded
Above ground oval pool liners that require a bead must be made with the correct bead type. You will need to know what bead type you require as well as the wall height of your pool which is best measured inside the pool from the bead track to the floor away from the cove. Typical wall heights include 48″, 52″ and 54″ although other wall heights are not uncommon.
Most newer pools use the Standard bead type but older pools – including Esther Williams or Johnny Weissmuller as well as Wilkes require a special bead to make sure they fit, and stay, in the receiver track. The available bead types for your liner are shown below. Please ensure that you select the correct bead type before ordering.
Overlap liners fit hang over the wall of your pool under the pool top rail. They don’t have a bead and instead use coping strips to hold the liner on the pool wall. Overlap liners will fit any pool with wall heights up to 54″.
For Round above ground swimming pools which are overlap and also have a hopper (deeper/dug out section) you will need to choose the Expandable pool liner product item for your pool size. Expandable pool liners will fit pools with any wall height and a recommended maximum depth of 72″.
Don’t worry if you don’t see your pool size below. Your pool may be a custom or less common size. Please contact us for assistance. Generally, the price for your custom sized above ground round pool liner will be the same as the nearest size up (ex. 26′ round would be priced the same as a 27′ liner).
